Swedish designer Hedvig af Ekenstam has completed a number of product designs that do just this. Her ‘knitted radiator the ‘knitted radiator’ is designed using heating cables coiled to create a new type of radiator. The design is a flexible and lightweight screen that can be shaped to fit the user’s needs. I love it!

Her project ‘Heating Curtain’ is another radiator design. The curtain is made from fabric and has a heating coil woven into it to provide heat.

This light, visually attractive mobile heating unit is a beautiful and innovative alternative to the typical electric heater found in the market today.

That’s right, you guessed it: success. The changeover to the lilypad arduino went smoothly, and when we hooked it up to the battery power source everything worked!So now the technology pieces must be integrated into the garment. This will involve some temporary tacking and pockets, because we’re not sure exactly how it will work/feel once it is part of the vest. So before permanently altering the garment I’ve worked so hard on, we’ll try some arrangements and continue to develop that aspect later. But for now, we are both very happy with what we have.

Although it’s not done yet, I’ve posted some photos of the vest (a work in progress).So everyone will just have to wait and see how the whole thing looks together tomorrow morning.

Good luck everyone!

The next step was to create a logic-flow chart, which would form the foundation for writing our program. I had some help here, along with the programming, from the lovely Bryan (thank you Bryan!). Once the logic was written, the rest was easy for Bryan, and started to make some sense for me.

The ’sketch’ for now works as follows:

- we can now give the sketch a random heart rate, and it will calculate which track the MP3 player should play, and successfully move to that track. Believe me, it sounds much easier than it actually is! The last step now is to successfully get the heart rate monitor interface (HRMI) to talk to the arduino, which is what we are having problems with now.

I’m quite well versed in sewing, so this project has been fairly straightforward in terms of creating the wearable portion. The trickiest part is always creating the pattern. Holly and I want to create a high-collared garment, so that the speaker can be embedded within the collar next to the wearer’s ear. The collar is going to be higher on the speaker side, and then scrunch down on the other side, so the wearer can hear the environmental sounds as well. The photos I’ve posted show the beginnings of patterning, with a paper and mannequin mock-up, and then me wearing the very crude garment that I’ve thrown together, before the tailoring and adjustments I’ve made now.

A sketch has been settled on, and I’m in the process of making a pattern for the garment. The collar of the vest will be high enough to cover one of the wearer’s ears, while the other side can be scrunched down so that the ambient sounds of the environment can be heard as well.

After I make a pattern, I’ll sew together a quick muslin and work out the details. Simultaneously, we will be working out the details of our electronic components as well! So much to do, so little time. But at least its fun!

Here is an example of a different take on the idea of “interactive” using textiles:This is the anonymous hugging wall from Keetra Dean Dixon. There are two arms sewn in into the wall, so that you can either be the hugger, or the hug-ee, depending on what side you stand, or what mood you’re in.

I like the annonymous way of connecting with people, and I love the spin on “interaction” and the use of textiles. If walls can “come alive” and give out hugs, in what other ways can we engage with our environment? And what if all normally hard, rigid surfaces (like walls) were suddenly made of fabric and textiles? Wouldn’t that be interesting….